All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (open-port-53) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorialWhat’s must -
- Device must not be on any Unlocker. It Must be factory Unlocked.
- Create the Full Backup of the Applications and all.
- Battery Must be 80 % charged.
- Must Have Correct drivers Installed.
- Enable USB Debugging Mode.
- Download I9300XXELK4 on your computer
- Download ODIN v1.85
- Turn off your phone and enter into download mode. How to enter in Download Mode Know How >? To enter into download mode you need to press Volume down button and Home button simultaneously while turning the phone on.
- Execute/ODIN ODIN Connect your device to PC while your phone is in download mode.
- On successful Connection ID:COM boxes will turn yellow after some time.
- Now Select the following files from the extracted files in first download.
- Click on ‘PDA’ and select file with ‘CODE’ in its name
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
- Click start BUTTON in ODIN, IT WILL BEGIN THE Process.
- This installation will take 5 Mins or less after that the Handset will restart.
- disconnect device from computer.
- To ensure the successful Installation follow this :
- Now you need to enter into recovery mode,to enter into recovery switch on the phone while pressing Volume up,Home and Power buttons together.
- Using the volume buttons and power to confirm select wipe data/factory reset from the recovery menu.
- Select reboot system now and wait for device to boot again.